Noffz Technologies GmbH

Booth number E1.1833

www.noffz.com

NOFFZ Technologies develops & produces industry-leading test systems and solutions for the entire product development process, from prototyping and validation to series production.

About us

About NOFFZ Technologies GmbH

NOFFZ Technologies develops and produces industry-leading test systems and solutions for the entire product development process, from prototyping and validation to series production.

The company was founded in 1989 by Wilfried Noffz and currently employs more than 160 people at nine locations worldwide.

From the company's headquarters in Toenisvorst, Germany, NOFFZ supplies internationally renowned electronic manufacturers from the automotive (ADAS, Connected Car, RF), consumer electronics, medical technology and telecommunications sectors.

NOFFZ Technologies is certified according to DIN EN ISO 9001.
https://www.noffz.com

Address
Noffz Technologies GmbH
Tempelsweg 24 A
47918 Toenisvorst
Germany

Phone: +49 2151 998780
Fax: +49 2151 9987888
Internet: www.noffz.com

Representative
NOFFZ Technologies GmbH
Rm. 515, Bldg. 5, No. 45 Songbei Rd.
215024 Suzhou
P.R. China

Phone: +86 15 862321094
Internet: www.noffz.com

Products and services

Noffz Technologies offers intelligent test solutions for the large area of IoT products. We develop suitable test solutions for all products in almost every industry in which physical and virtual objects are networked together and work through information and communication technologies.

This includes the areas of consumer, home automation, industry, automotive & telecommunications.

At our booth, we will be happy to provide you with information about our portfolio and show you some of our special products on site.

Infotainment Test Device for A²B (ITD1024):

  • Stand-alone or built-in device for testing all products that contain A²B

  • The latest digital audio technology

  • Applicable from development, through validation to production

  • Can generate and record up to 32 audio channels in real time

    Connectivity Test Devices:

  • Base Station (sUTP 5018) - a powerful celluar network emulator

  • GNSS-Simulator (sUTP 5017) - simulation of GPS, Beidou,EraGlonass, Galieo…

  • UWT (Universal Wireless Tester) - a Non-Signaling tester
NOFFZ Base Station (sUTP 5018)

Execution of signaling tests of mobile radio technology, mainly used for Multi DUT product validations.
By combining high performance, real-time computing and a software-defined radio platform, a customized cellular environment can be created cost-effectively and in a compact size.
(Configuration possible: parallel tests up to 1000 phone modules, Go/No-Go-Check up to 3600 hours life cycle analysis, equipped for two-cell SISO, 2×2 MIMO or single-cell 4×4 MIMO operation)

Further reading

NOFFZ GNSS Simulator (sUTP 5017)

Realisation of individual real-time signal simulations, like multiband signals for GPS, Glonass, Galileo & additional signals for interference, SBAS or RTK. Differential GNSS & multi-vehicle simulation, GNSS satellite orbit modification, unlimited pseudorange additive ramps & custom fixed positions are also supported. Equipped with two Software Defined Radios with a total of four RFchannels. The integrated scenario editor allows free definition of trajectories in up to six degrees of freedom

Further reading

NOFFZ Universal Wireless Tester (UWT)

The Universal Wireless Tester can be configured as a multi-channel RF test system.
It is based on the vector signal transceiver from National Instruments and the NOFFZ Universal Multifunction Switch/Combination RF Frontend Unit and is used for testing RF modules in a panel or multi-DUT.

Efficient to increase test capacities, the system is prepared for all current and future wireless standards like 5G.

Further reading

News & Innovations

Infotainment Test Device for A²B (ITD1024)

For testing all products that contain A²B, such as: amplifiers / loudspeakers, head units in cars, e-call systems, microphones, noise canceling units, sensors...

ITD1024 is a stand-alone device and can work without a PC. Applicable from development, through validation to production. Complex test scenarios can be implemented.

Our device can generate and record up to 32 audio channels in real time, it offers a text-based SCPI-API, which can be used with almost any programming language. We also offer a comprehensive software package - the ITD1024 SDK.

The ITD 1024 is equipped with industrial connectors so that connection is very easy. There are also mounting accessories to build the device into a tester.

Further reading

Click here if you notice an image that violates copyright or privacy rights.

Get in contact
OK

We only use functionally necessary cookies and the web analysis tool Matomo in order to optimally design and continuously improve our website for you. By continuing to use our website, you agree to this. Further information and an objection possibility can be found here: Data protection